Gold IRA costs come in three layers: a one-time setup fee, yearly custodian and storage fees, and the dealer spread you pay when buying metal. Enter your numbers below to see the total over the years you plan to hold, and what that means as a yearly percentage of your balance.
The defaults are typical industry figures. To try Noble Gold's published schedule, enter a $50 setup fee, $125 a year for maintenance and $160 a year for storage.
Estimated total cost over 10 years:
$0
This estimate uses only the numbers you enter. It holds fees flat, ignores price changes in the metal and doesn't include taxes. Ask each company for its current written fee schedule.
How to Use the Calculator
- Enter Your Account Value
Use the amount you plan to put into metal.
- Add the Company's Fees
Setup, yearly custodian or admin fee, and storage. Use either a flat storage fee or a percentage, not both.
- Add the Dealer Spread
Ask the company for the markup over spot on the products you'd buy. Enter it as a percentage.
- Set the Years Held
Longer holding periods spread the setup fee and spread over more years.
Example Results
Here's what a few scenarios look like using fees only, with no spread entered:
| Balance | Flat Fees ($50 setup + $285/yr) | Share of Balance per Year |
|---|---|---|
| $20,000 | $2,900 | About 1.45% |
| $50,000 | $2,900 | About 0.58% |
| $100,000 | $2,900 | About 0.29% |
| $250,000 | $2,900 | About 0.12% |
Flat fees stay the same as your balance grows, so their weight falls sharply on larger accounts. That's why flat-fee schedules tend to favor balances of $50,000 and up.
Why the Spread Matters Most
The dealer spread is the difference between what you pay for metal and its spot value. It's paid once when you buy, and you face a buy-back price when you sell.
On a $50,000 purchase, a 3% spread costs $1,500 and a 10% spread costs $5,000. Either can outweigh years of account fees. Collector coins often carry much higher markups than common bullion. Our premiums over spot guide explains what's typical.
Questions to Ask Before You Buy
- What's the setup fee, and are any fees waived for my balance?
- What are the yearly custodian and storage fees, and is storage segregated or commingled?
- What's the markup over spot on each product you're recommending?
- What would you pay to buy it back today?
- Are there fees to close the account or transfer it?
Get the answers in writing, then run them through the calculator. Compare at least two companies.
How Noble Gold's Fees Compare
Noble Gold publishes a $50 setup fee, a $30 wire fee, $125 a year for maintenance and $160 a year for storage, about $285 a year in total. It lists a $75 fee for in-kind distributions and a $250 closure fee. Its IRA minimum is $20,000.
Our Noble Gold fees guide breaks down each charge and how they compare with other companies.
Gold IRA Fee Calculator FAQs
How much does a gold IRA cost per year?
Many gold IRAs cost roughly $200 to $400 a year in combined custodian and storage fees, plus a one-time setup fee and a dealer spread when you buy. Noble Gold publishes $285 a year.
Are flat fees or percentage fees better?
Flat fees usually work out cheaper on larger balances, while percentage-based storage can be cheaper on small balances. Run both through the calculator.
Why does the dealer spread matter so much?
It's often the biggest single cost. A 5% spread on $50,000 is $2,500, more than several years of account fees combined.
Does this calculator include taxes?
No. It estimates account and dealer costs only and doesn't account for metal price changes or taxes.
The Bottom Line
A gold IRA's true cost is setup plus yearly fees plus the dealer spread. Flat fees matter less as your balance grows, but the spread matters at every size. Use real quotes, compare companies and get everything in writing.